EGE-UHD-SDVIP-CONBX-2

Video Over IP Matrix Controller Box for UHD-SDVIP-KVM-TRX

Video Over IP Matrix Controller
for EGE-UHD-SDVIP-KVM-TRX
WebGui Control

Description

This IP Master Controller is a powerful and exible solution for controlling multiple SDVoE (Software De ned Video over Ethernet) based extenders within same network. The user only needs to install this unit into the same local network as the extenders (transmitters and receivers) to easily de ne and con gure channel routing selections (including video, audio, and a variety of control interface types) using the WebGUI. Without the use of this centralized control unit, each transmitter and receiver pair would only be able to function in a point-to-point capacity. Additionally, this unit supports controlling and con guring the matrix, video wall, and multiviewer modes of connected SDVoE units. The settings of all connected transmitter/receiver units, including IP con guration, compatibility settings, and extender status are clearly displayed within the WebGUI. A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other trigger-supporting products, which can be installed within a podium or table in a conference room or classroom. This interface can allow the user to activate stored macros with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet and IR Remote.

Spesifications

  • Enables the management and cofiguration of multiple compatible SDVoE extenders through a single WebGUI
  • Provides control over the independent routing of video, audio and control signals between all local compatible transmitters and receivers
  • Control over matrix, video wall, and multiviewer modes using WebGUI macros
  • WebGUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection, etc.
  • Can generate serial commands to directly control an external serialcontrollable device
  • Can be powered by Ethernet switches supporting the IEEE 802.3af 2003 PoE standard (Optional)
  • Trigger Control Keypad support for easy, single-button, macro activation (Optional)
  • Standard control is available via WebGUI (remote or local), RS-232, Telnet, and IR Remote

Box Contents

• 1× IP Master Controller (SDVoE)

• 1× 5V/2.5A DC Power Adapter

• 1× Terminal Block (3-pin)

• 3× Terminal Block (5-pin)

• 1× IR Extender Cable

• 1× Remote Control (CR-183)

• 1× Shockproof Feet (Set of 4)

• 1× Operation Manual

Diagrams

Dowloads

User Manual
Datasheet

Enquiry